The Peddinghaus 1100 Miter Series saw delivers fast, accurate miter cutting to structural shapes and profiles from 90 degree cutting up to 30 degrees right and left. The 1100 Miter Series saw employs Speed Sawing technology that guarantees rapid sawing – with no operator intervention – and no flood coolant residue to impede production.
The new DG 1100 MITER BAND SAW is the perfect companion to the Peddinghaus PCD 1100 multi-spindle drill line. This tandem system has a small shop footprint but delivers high tonnage capability. Fully CNC and integrated with all major detailing and modeling software— it will change your outlook on productivity.
Big Tough Blade
A Rugged 2 1/8” x .063” (9300 x 1.6mm) thick blade assures tons of accurate, fast beam cutting, with effective blade guide monitoring.
Hydraulic Moving Vise Clamp
Depending on the required mitre angle, as well as the sawing task, it is possible to position the hydraulic material vise at either the infeed or outfeed side of the sawblade, this ensures a minimum amount of material is needed for trim cuts and tail end cuts and the material is always clamped square at 90° and as close as possible to the saw blade.
Blade Guidance System
To ensure speedy, accurate and quality cuts Peddinghaus has optimized the blade guidance system.
Powerful Motor with and even more Powerful Blade
A key component to the Peddinghaus bandsaw line is the 12.5 Horsepower motor.
A 2-5/8 in (67mm) saw blade is coupled with this monstrous motor for minimum cut times and maximum cutting range.
The Peddinghaus 1100 Miter Series saw delivers fast, accurate miter cutting to structural shapes and profiles from 90 degree cutting up to 30 degrees right and left. The 1100 Miter Series saw employs Speed Sawing technology that guarantees rapid sawing – with no operator intervention – and no flood coolant residue to impede production.
