Finn-Power portable crimping machines are designed for field service, when repairs must be made on-site. They are simple and straightforward in construction, easy to operate and highly reliable. Their sturdy handles allow the portable units to be easily carried to any location.
Model
P16HP
P16AP
P20HP
P20AP
P20CS
P32CS
Crimping range (mm) 1
10 — 45
10 — 45
10 — 61
10 — 61
10 — 61
10 — 87
Crimping range (inches) 1
0.39 — 1.77
0.39 — 1.77
0.39 — 2.40
0.39 — 2.40
0.39 — 2.40
0.39 — 3.42
Crimping force (kN)
955
955
1370
1370
1370
2000
Crimping force (tonnage)
95
95
137
137
137
200
Crimpings / hour 2
—
—
—
—
250
150
Max. hose size (inches)
1
1
1½
1½
1½
2
Die set 3
P16
P16
P20
P20
P20
P32
Maximum opening (mm) 4
+20
+20
+25
+25
+25
+33
Master die (D / L mm)
39 / 64
39 / 64
84 / 80
84 / 80
84 / 80
99 / 80
Master die (D / L inches)
1.54 / 2.52
1.54 / 2.51
3.31 / 3.15
3.31 / 3.15
3.31 / 3.15
3.90 / 3.15
Control
manual
manual
manual
manual
MS
MS
Motor (kW)
hand pump
air pressure
hand pump
air pressure
1.6 / 2.2 5
1.6 / 2.2 5
Motor (HP)
hand pump
air pressure
hand pump
air pressure
2.1 / 3.0 5
2.1 / 3.0 5
QC tool 14
—
—
O
O
O
O
Foot pedal15
—
—
—
—
—
—
Control unit: integrated
X
X
X
X
X
X
Control unit: C1
—
—
—
—
—
—
Control unit: C2
—
—
—
—
—
—
Back stop device: mechanic
—
—
O
O
O
O
Back stop device: electric 15
—
—
—
—
—
—
Mirror
—
—
—
—
—
—
Pressure control P1 16
—
—
—
—
—
—
Pressure control P2 16
—
—
—
—
—
—
AGS auto greasing 16
—
—
—
—
—
—
Remotic control unit
—
—
—
—
—
—
Counter L1, L2, L3
—
—
—
—
—
—
ASCII signal 17
—
—
—
—
—
—
VS PLUS control 17
—
—
—
—
—
—
Length (mm)
331
337
487
583
571
626
Width (mm)
386
402
441
477
533
543
Height (mm)
271
271
389
345
387
421
Length (inches)
13.1
13.3
19.2
23
22.3
24.9
Width (inches)
15.2
15.9
17.4
18.8
20.6
21.5
Height (inches)
10.7
10.7
15.4
13.4
15.2
16.8
Weight (kg)
26
28
66
59
83
116
Weight (lbs)
57
62
146
130
183
256
X = standard O = optional — = not available (1) With standard dies. Crimping range can be increased with special dies.
(2) Theoretical with ½ hose, diameter 10 mm. (3) See table for die set data. (4) Maximum opening is the total die travel.
Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with
die set in place. (5) 12V / 24V. Overload controlled. (6) 1-phase / 3-phase. (7) FP140 dies can be used without adapter dies.
(8) Hydraulic hose / industrial hose. (9) With adapter dies. (10) Hose cutter. (11) Full cycle. (12) Die travel / feeding channel.
(13) NC20, NC30 and NC40 dies can be used. (14) Available for P20, P32 and CC22 dies. (15) Not available in MS control.
(16) Technical implementation varies depending on the machine model. Please verify the suitability of the option
from your distributor. (17) Available in VS models only.
