Compact high performance Waterjet Cutting Machine studied for an easy operation and built with high quality commercial components suitable for any standard 2D cutting job application.
The I.T.C™ System manages to produce straight walls at the fastest cutting speed: in fact, the CNC automatically compensates the inclination (up to 2°) and the orientation of the jet of water to eliminate the tapering effect. This ensures a high quality part at a low cost.
During I.T.C™compensation, the Jet is also directed towards the piece in order to reduce the Tail Delay effect and the acceleration-deceleration ramp times in the corners, for faster and cheaper cutting cycles.
The WaterCad-Cam™ Software generates the I.T.C™ Program automatically just through a few Clicks.
DX510 Specification:
X = 3.350 mm
Y =1.850 mm
Z = 170 mm
d = infinite |
Net Cutting Area
(X, Y, Z) |
X = 11'
Y = 6'
Z = 7'
d = infinite |
| 3.600 mm x 2.100 mm |
Inside Table Working Area |
12' x 7' |
4.800 mm x 3.000 mm
x 1.900 mm |
Overall Table Dimension |
16' x 10'
H6' 1/2 |
| 0 -:- 20 mt/min |
Rapid Speed |
0 -:- 67' / min |
| 5000 Kg. |
Table Weight |
11.000 lb |
+/- 0,05 mm
+/- 0,025 mm
+/- 0,05 mm |
Position Accuracy
Repeatibility
Ball Bar (300 mm diameter) |
+/- 0,002''
+/- 0,001'
+/- 0,002'' |
| Model |
Net Cutting Area |
SUPREMA
DX (4 axis) |
| 44 |
4' x 4'
1.250 x 1.250 mm |
 |
| |
| 510 |
11' x 6'
3.350 x 1.830 mm |
 |
| |
| 612 |
6' 1/2 x 13' 1/2
2.000 x 4.000 mm |
 |
| |
| 620 |
6' 1/2 x 20'
2.000 x 6.100 mm |
 |
| |
| 820 |
8' x 20'
2.500 x 6.100 mm |
 |
| |
| 1020 |
10' x 20'
3.050 x 6.100 mm |
 |
| |
|
|
